- 4 USB 3.0 Hub
- Interface with a computer: USB 3.0 Type-A up to 5 Gbit/s
- LED indicator
- High-quality aluminum housing
- Supports Windows, Linux, macOS 9 or newer

- Equipped with LEDs indicating an operation of the device
- Maximum data transfer rate of 480 MBit / s
- Hub does not require driver installation, compatible with hot-swap and Plug & Play
- Power ports without a power supply up to 100mA, with a power supply to 500mA
- Supported by PC ORAC Mac PC
- Required Operating Systems: Windows 98SE/ME/2000/XP/Vista/7/8, Mac OS 10.x or later

- Supports 127 Hi-speed devices
- Works in 3 speed modes (max 480 Mb/s)
- Integrated USB cable
- Provides up to 500mA for each port
- Fully supports Plug&Play
- Built in security, on/off switches and diode signalization for each USB port
- OS Windows 2000/2003/XP/Vista/7/8, and Mac OS 10.x

- USB Type-C Hub for 4 USB Type 3.0 ports
- Interface with a computer: USB 3.0 Type-C to 5 Gbit / s
- LED indicator
- High-quality aluminum housing
- Supports Windows, Linux, macOS 9 or newer

Entry:

• 1x USB 3.2 Gen1 / SuperSpeed USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• USB connection port with type A male connector placed on a 30 cm long cable.

Exit:

• 4x SuperSpeed USB port, USB-A female csatlakozó.
• Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).
• The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).

Hub power mode via USB cable (bus power):

• USB bus power is sufficient to connect a low-power USB device (mouse, keyboard, card reader, flash drive, etc.) or a self-powered device (printer, scanner, 3.5" external drive) to all four ports.
• In this power mode, the USB hub can also work simultaneously with up to two 2.5" magnetic external drives.
• Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. Charging (divided into all ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).

Hub power mode via USB + external USB charger (self power):

• Integrated micro USB connector for additional power to the hub.
• For additional power supply to the hub, you can use any wall charger for mobile devices (not included) with a micro USB connector (recommended charger output current min. 2A).
• In this power mode, the USB hub can operate up to 3 magnetic 2.5 external drives. This mode is recommended for connecting to smartphones and tablets.
• Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external wall charger).

Entry:

• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• USB connection port with type A male connector placed on a 120 cm long cable.

Exit:

• 4x SuperSpeed USB port, USB-A female connector.
• Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).
• The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).
• The USB-C hub can permanently support several external drives.

Properties:

• Possibility to connect the device on the run thanks to Hot Plug support.
• Full Plug and Play support.
• Standby mode support.
• A quality shielded cable guarantees high communication speed and minimal unwanted interference.
• The white LED indicates connection to the computer's USB port.
• Bus powered (USB bus power).

Power / Charging:

• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports.
• The USB hub can permanently support several external drives.
• Charging mobile devices (including iPad) with a current of up to 1.5A is possible in each of the hub's ports. The total charging current (divided into all ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port).

Entry:

• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male.
• Backwards compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0.
• Compatible with Thunderbolt 3.
• USB connection port with type C (male) connector placed on a 20 cm long cable.

USB output:

• 2x SuperSpeed USB port, USB-A female connector.
• 1x USB-C Power Delivery port (for charging only), USB-C female connector.
• Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).
• The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).
• The USB-C hub can permanently support several external drives.
• Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the external wall charger).

HDMI out:

• HDMI.
• HDMI A (F) female connector.
• Maximum supported resolution 4K / 4096 x 2160 @ 30Hz.
• Resolution WQHD 2560 x 1440 @ 60Hz max.
• Full HD resolution 1920 x 1080 at 60, 100, 120 Hz max.
• A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a USB-C port with Thunderbolt 3 support is required for proper video output support. We also require a suitable operating system. The video output function will not be available when these requirements are not met.
• Hot-Plug-Detect support.
• TMDS (Transition Minimized Differential Signaling) support.
• Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection).
• Audio up to eight LPCM channels, support for audio compression (AC-3, DTC) and HBR audio.
• Sampling rate up to 192kHz and 24-bit audio support - depends on source and destination devices, e.g. notebook/phone and TV/display/AV receiver.

Card reader - two slots:

• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro.

The reader supports the following flash card specifications:

• SD 1.0/1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).
• Support SD 3.01 and SD Jukebox APP (CPRM function).
• Support Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) up to 104 MB/s.
• Support for ECC (Error Correction Code) and CRC (Cyclic Redundancy Check) hardware functions.
• 2 LUN - in file managers the reader is indicated as two disks.

Power Delivery:

• Power Delivery 3.0 support - continuous power supply to the device from the network adapter via the USB-C hub.
• Maximum power supply via PD output USB-C hub 100W - 20V/5A.
• Notebook or phone with Power Delivery support from USB-C port and appropriate network PD adapter required.

Entry:

• 1x USB 3.2 Gen 2 / SuperSpeed USB 10 Gbps port, USB-C male.
• Backward compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and USB 2.0.
• Compatible with Thunderbolt 3.
• USB connection port with type C (male) connector placed on a 13 cm long cable.

USB output:

• 2x SuperSpeed USB 10 Gbps port, USB-A female connector.
• 1x SuperSpeed USB 10 Gbps port, USB-C female connector.
• 1x SuperSpeed USB 10 Gbps port for data transfer or Power Delivery, USB-C female connector.
• Support 10,000 / 5,000 / 480 / 12 / 1.5 Mbps (SuperSpeed+ / SuperSpeed / High / Full / Low speed).
• The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit / s).
• The USB-C hub can permanently support several external drives.
• Fast charging of mobile devices through the USB-C hub ports with a current of up to 3A.

HDMI out:

• HDMI.
• HDMI A (F) female connector.
• Maximum supported resolution 4K / 4096 x 2160 @ 30Hz.
• A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a USB-C port with Thunderbolt 3 support is required for proper video output support. We also require a suitable operating system. The video output function will not be available when these requirements are not met.
• Hot-Plug-Detect support.
• TMDS (Transition Minimized Differential Signaling) support.
• Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection).
• Audio up to eight LPCM channels, support for audio compression (AC-3, DTC) and HBR audio.
• Sampling rate up to 192kHz and 24-bit audio support - depends on source and destination devices, e.g. notebook/phone and TV/display/AV receiver.

Power Delivery:

• Power Delivery 3.0 support - continuous power supply to the device from the PD network adapter via the USB-C hub.
• Maximum power supply via PD USB-C output 60W - 20V/3A.
• Notebook or phone with Power Delivery support from USB-C port and appropriate network PD adapter required.

Hub power via USB cable (bus power):

• USB charging is sufficient to connect a low-power USB device (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.
• In this power mode, the USB hub can handle up to 2 magnetic 2.5" external drives at the same time.
• Powering portable devices (including iPad) is possible in this power mode, but the power supply current reaches only 0.9A, in some cases even over 1A (depending on the computer).

Powering your own hub from a USB charger - not included in the package (self power):

• You can use any mobile device charger with a micro USB connector (recommended charger output current 2A).
• The USB hub in this power mode can handle 3 magnetic 2.5 external drives. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 2 external 2.5" drives at the same time.
• Fast charging of mobile devices (including iPad) with up to 2A current in each of the hub's ports. The total current delivered by the hub while charging is limited by the output current of the external power adapter.

Standalone power hub mode without PC connection (charging hub):

• When the computer is turned off, connected or not connected to the computer, the hub works with power from the USB charger as a standalone USB power hub.
• Fast charging of mobile devices (including iPad) with up to 2A current in each of the hub's ports. The total current delivered by the hub while charging is limited by the output current of the external power adapter.

Input:

• 1x USB 3.2 Gen1 / SuperSpeed USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• USB connection port with type A male connector placed on a 20 cm long cable.

Output:

• 4x SuperSpeed USB port, USB-A female connector.
• Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).
• The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).
• The USB-C hub can permanently support several external drives.

Characteristics:

• Possibility to connect the device on the run thanks to Hot Plug support.
• Full Plug and Play support.
• Standby mode support.
• A quality shielded cable guarantees high communication speed and minimal unwanted interference.
• A white LED indicates that the hub is connected to the computer.
• Bus powered (USB bus power).

Power / Charging:

• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports.
• The USB hub can permanently support several external drives.
• Charging mobile devices (including iPad) with a current of up to 1.5A is possible in each of the hub's ports. The total charging current (divided into all ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port).

- Smart IC - recognizes the required power consumption of the connected device
- Housing made of high quality aluminum
- LED indicator for activity on all ports
- Integrated surge protection
- Hot Plug and Plug & Play

AUKEY CB-C75 Ultra-modern, compact, aluminium 6-in-1 USB-C PD HUB

• 3 USB 3.1 ports
• Gigabit Ethernet port (10/100/1000 Mbps)
• HDMI 4K@30Hz port
• USB-C PD Power Delivery 100W fast charging port

Connection via port: USB-C

USB transfer speed: up to 5Gbps

Supported video resolution 2160p, 1080p, 4K UHD, 720p

• 1 x power socket
• 1 x USB 3.1 Gen 1 (USB3.0) socket for connecting to a computer
• 7 x USB 3.1 Gen 1 (USB3.0) data transmission socket
• 1 x AiPower USB power socket
• 1 x USB Quick Charge 3.0 power socket
• Interfaces: 7 x USB 3.1 Gen 1 (USB3.0); 2 x USB AiPower; 1 x USB Quick Charge 3.0
• USB data transfer rate: up to 5 Gb/s
• Plug and play - no drivers required
• Input: AC 110-240V 50/60Hz
• USB Data Output: DC 5V 900mA (total)
• USB AiPower Output: DC 5V 2.4A (total)
• USB Quick Charge 3.0 Output: DC 3.6V-6.5V 3A, 6.5V-9V 2A, 9V-12V 1.5A
• Material: Aluminium
• USB-A USB-A cable length: 1 metre

• 4 downstream USB 3.0 ports with enough space around the connectors.
• upstream USB 3.0 port with USB 3.0 type-A male connector on permanently attached 120 cm long cable.
• Compatible with USB 3.0, backwards compatible with USB 2.0 and USB 1.1.
• Support 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed).
• USB Battery Charging support in specification 1.2.
• Charging source with USB type-A 5V/2A output and micro USB charging & data cable 1.5 m included in the package.
• Each port of the hub can be used to charge up to 2 A (with an external USB charger connected).
• Supports iPad charging up to 2A (with external USB charger), up to 1A (without external charging).
• Possibility to connect the device on the run thanks to Hot Plug support.
• Total Plug and Play support.
• LED indicating that the hub is connected to power.
• Overcurrent detection and protection.

• 4 downstream USB 3.0 ports with enough space around the connectors.
• upstream USB 3.1 Gen 1 port with a USB type-C male connector on a permanently attached 40 cm long cable.
• Compatible with USB 3.1 gen 1 / USB 3.0, backwards compatible with USB 2.0 and USB 1.1.
• Support 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed).
• USB Battery Charging support in specification 1.2.
• Each port of the hub can be used for charging up to 2A (with an external USB charger - not part of the package).
• Possibility to connect the device on the run thanks to Hot Plug support.
• Total Plug and Play support.
• LED indicating that the hub is connected to power.
• Overcurrent detection and protection.

- 1 x HUB USB
- 1 x USB Cable
- 1 x (5V,2A) Power supply

- USB concentrator
- Power supply
- USB cable
- User manual

1x IB-HUB1701-C3, 1x Power supply,
1x USB Type-C/Type-A cable (1 m), 1x Manual

AUKEY CB-H6S hub, USB-A USB-A cable (1m), power adapter

• SuperSpeed USB hub with 20cm fixed USB cable
• Printed installation guide
• Packed in a cardboard box with a hole for hanging

• SuperSpeed USB hub with 30cm fixed USB cable
• Multilingual manual
• Packed in a cardboard box with a hole for hanging

• SuperSpeed USB hub with 120 cm USB cable permanently
• Printed installation guide
• Packed in a cardboard box with a hole for hanging

• USB-C 3.1 hub with 40 cm fixed cable
• Printed manual
• Packed in a cardboard box

• USB-C hub with 13 cm cable permanently
• Printed installation manual
• Packed in a cardboard box

• USB-C hub with 20 cm cable permanently
• Printed installation manual
• Packed in a cardboard box with a hole for hanging

• USB 3.0 hub with 16 cm fixed cable
• Packed in a blister sealed on both sides with clearly defined parameters and installation instructions

• USB 3.0 hub with 120 cm fixed cable
• Printed installation manual
• Packed in a cardboard box

• USB 3.0 hub with 120 cm fixed cable
• Universal charging/charging adapter with 5V/2A USB output
• Universal charging and data cable USB type A male / micro USB male length 150 cm
• Printed manual
• Packed in a cardboard box

The IB-HUB1701-C3 can achieve a maximum transfer rate of up to 5 Gbit/s thanks to USB 3.0. All ports can be switched on and off individually during operation
without affecting the function of the other ports. With the 20 V power supply unit, the hub can be operated as an active charger. The USB ports (5 V / 1.5 A) comply
with the battery charging specification BC 1.2 and offer a convenient way to charge mobile devices.

- Active concentrator, possbility of charging only one USB port. In case of bigger load an external power supply is needed

Hub passive/active. It can by powered only from the USB connector and the power supply 5V/2A.

- 90 x 35 x 20 mm

- Package size: 143 x 230 x 70 mm
- Cable length USB 55cm

0,2 x 5,7 x 1,5 cm

20 x 30 x 95 mm

21 x 29 x 95 mm

45 x 145 x 25 mm

63 × 63 × 15 mm

70 x 24 x 18 mm

96 x 32 x 22 mm

101 x 19 x 22mm

105 x 40 x 12 mm

106 x 39,3 x 11,3 mm

110 x 35 x 12.5 mm

174 x 68 x 28 mm

189 x 68 x 35 mm

194x60x21 mm

diameter 60x18mm

• 70 x 24 x 18mm
• USB cable length 120 cm

• Hub dimensions 96 x 32 x 22 mm
• USB charger dimensions 22 x 36 x 76 mm including plugs