Monitor 22 MS EA223WM bk W-LED TFT,DVI

Ražotājs: NEC
Modelis: 60003294
Preces kods: 14-2237

Brief Attributes

See all attributes

Atlaide tiek piemērota tikai fiziskām personām.
Atlaide ir spēkā no 01.04.2021 līdz 30.06.2021

  • Pieejamība: Noliktavā
  • Skaits > 5

Paredzamais piegādes laiks no 05-05-2021 līdz 10-05-2021 datumam
Šī prece no noliktavas brauc uz veikalu līdz 10 darba dienām pēc apmaksas saņemšanas.

Sūtījuma sekošanas sistēma!

Sūtījuma sekošanas sistēma!

Tagad jūs varat ērti sekot savam sūtījumam.

Apmaksa ar bankas karti onlainā!

Apmaksa ar bankas karti onlainā!

Pasūtījumu pieņemšana 24 stundas dienaktī!

Pasūtījumu pieņemšana 24 stundas dienaktī!

Mēs apstrādāsim jūsu pasūtījumu jebkurā laikā.

Aspect ratio 16:10
Auto Pivot Yes
Brightness 250 cd/m²
Color Black
Dimensions 503.5 x 384 x 218 mm
Dot pitch 0.282 mm
Dynamic contrast 25 000:1
I/O connectors 1 x 15-pin D-Sub; 1 x DisplayPort; 1 x DVI-D
Matrix type TFT-TN
Model MultiSync EA223WM
Number of colors 16,7 mln
Power consumption 25 W
Resolution 1680 x 1050 (WSXGA+)
Response time 5 ms
Screen format Widescreen
Screen size (diag.) 22"
Speakers built-in Yes
Static contrast 1 000:1
Touch screen No
Transreflective technology LED
TV tuner built-in No
VESA 100 x 100
Viewing angle, horizontal 178 °
Viewing angle, vertical 178 °
Weight 5.6 kg

The NMC network card allows users to control the UPS through LAN, Intranet or remotely, via the Internet. The UPS can be controlled by SNMP agents, HTTP website interface or a Telnet terminal.

The NMC network card is connected directly to LAN through an RJ-45 connector. For this purpose no serial ports need to be occupied and no separate management software needs to be used for each individual UPS. Thanks to the applied system of protective devices, the access to the UPS's parameters and controls can be obtained from any PC, provided a correct password for reading is given. This allows Ethernet administrators to quickly react to current needs related to guaranteed power supply, from any place in the company.

If there is a fault in the UPS's output or other events have taken place, the management card can be used to safely shut down the server's or the workstation's operating system, thanks to the System Protect Software (SPS) that can be installed under a variety of operating system. The system can be safely shut down if events such as these take place: incorrect status of the UPS's output, low battery level, overload or excessive temperature of the UPS, scheduled shut down, etc. The user may select conditions that, when triggered, order the card to inform the SPS about the event, in which case the SPS will safely shut the operating system down, as configured.